Group Members
Products Current Location: Home > Products > Products

Non-ferrous Metals

All our single wire plating plants for non-ferrous metals – Cu-wire and Cu-alloys – coating with zinc, tin, nickel

and silver are high speed plants that can operate with up to 15 m/s.

 
The diameter range is 1.2 – 2.6 mm for soft Cu (250 N/m2) and 1.0 – 2.0 mm for hard Cu (450 N/m2).

Depending on the coating material – according as Sn, Zn, Ni or Ag – the wire plating of non-ferrous metals

provides different benefits: 

 

Copper wires – tinned or lead-tinned: corrosion protection, improvement of the electrical conductivity

Copper wires – silvered:  corrosion protection, improvement of the electrical conductivity, better appearance

Copper wires – nickel-plated:  corrosion protection, increase of temperature resistance

 

The main benefits of our wire plating plants for non-ferrous metals:

 

— Our scope of delivery includes all plants that are needed for the production of coated wire such as decoilers, 

    wire drawing machines, annealing equipment, coilers
— The electrical operating unit that we also supply completely, guarantees  an optimal synchronization of all

    inline components
— Complete solutions with integrated environmental technologies are  available
— Less amount of rinse water and reduced consumption of chemicals because of  multi-stage cascades
— By the use of a vacuum evaporator – that’s recommended – the process becomes free of waste-water and

    thereby the operating costs are reduced



 


 

 

Copyright ? 2016 Shanghai History channel than LeBow Engineering Co., Ltd 滬ICP備16020502號 Site Map | Legal Notices